Direct mail checklist: planning, design and dispatch
The checklist takes you in five stages from defining the goal to the evaluation. Tick off each point right here: your progress stays saved in your browser until you reset it.
✓
Checklist
Updated10/11/2026
This direct mail checklist summarises what should be done before and after dispatching an advertising letter. Each point is worded as a statement that you can answer with yes or no. How to arrange the steps in time is described in the guide Planning a direct mail campaign, and the direct mail guide gives an overview of the whole topic.
Your ticks are only saved in this browser. Nothing is transmitted to briefsenden or to third parties.
0 of 24 points done
Goal and target group
Addresses and budget
Message and design
Print data and dispatch
Preparing and evaluating success measurement
Avoiding typical mistakes
The following mistakes often only become apparent once the letters are already on their way:
The benefit comes too late in the text. Whoever only finds the advantage in the third paragraph has often already stopped reading.
Several calls to action compete. Call, visit the shop and send a reply all at once makes the reader hesitate.
The offer deadline is too tight. Hardly any time remains between delivery and the end of the deadline, and the letter annoys more than it works.
Code or link does not work. A voucher code that the till does not recognise costs trust and makes the response unmeasurable.
Outdated addresses. Every undeliverable letter costs printing and postage without anyone reading it.
Unfavourable period. Letters that arrive during holiday periods or on bridge days miss many recipients. If your own team is short-staffed, queries are left unanswered.
Overloaded design. Many typefaces, colours and emphasis make the letter restless, and the most important thing gets lost.
No response channel with an origin. Without a code, your own URL or a direct extension, it is impossible to say later what the mailing achieved.
When all points have been checked, check the approval of the document and the recipient list one last time. In test mode you check the preview and the process without printing and without costs. You get a printed proof by sending a real letter to your own address.
A complete mailing checklist covers five stages: goal and target group, addresses and budget, message and design, print data and dispatch, and success measurement. What matters are points that can be checked, that is, statements you can answer with yes or no.
Yes, but only in your browser on this device. The ticks are saved locally and not transmitted to briefsenden. If you delete the browser data or use another device, the list starts empty again. With “Reset” you remove all ticks at once.
Ideally right at the start of planning, that is a few weeks before the desired delivery day. The first two stages concern decisions that determine everything else. The last stage accompanies you beyond dispatch to the evaluation.
First check the preview with several real records so that personalisation and address are right. With briefsenden you then play through the process in test mode, which prints nothing and costs nothing. For an impression of the printed letter, send a real letter to your own address.
Upload your advertising letter as a PDF or design it in the editor. briefsenden takes care of printing, enveloping, postage and handover to Deutsche Post.